Experience

Jinhui LI, male, Born in 1965, Ph. D, started his research on environmental sciences since 1983. He takes full time position of professor in Tsinghua University, and is responsible for the operation of Asia-Pacific Regional Centre for Hazardous Waste Management Training and Technology Transfer (Basel Convention Regional Centre in China) which is hosted by Tsinghua University, supervised by the secretariat of Basel Convention, UNEP. His research focus on management and treatment technology of e-waste and hazardous waste, pollution control engineering of solid waste, environmental risk assessment, soil pollution remediation. His working experiences are as followed: 1990.8-1991.4, official, assistant engineer. Qinghuangdao Beidaihe Environmental Protection Agency 1991.4-1994.3, staff, assistant engineer, engineer. Dahua Refined Chemicals Ltd. in Qinhuangdao. 1997.8-1999.6, postdoctoral researcher. Department of Environmental Science an Engineering, Tsinghua University 1999.7 to present, associate professor, Professor. Department of Environmental Science an Engineering, Tsinghua University

Areas of Research Interests/ Research Projects

Research Area:

1. Policy and management of solid waste and hazardous waste

2. Resource technology for E-waste and hazardous waste

3. Environmental risk Assessment

Research Projects:

1. Groundwater Exposure Risk Assessment and Different- level Management Research on Hazardous Waste Treatment and Disposal Sites, Ministry of Environmental Protection, 2009-2012.

2. Environmental Risk Assessment and Regional Pollution Investigation on Typical E-waste Central Treatment, Ministry of Environmental Protection (Chinese Research Academy of Environmental Sciences  ), 2009-2010

3. The Follow up Work on the 4th Sino-US Strategic Economic  Dialogue on Bulk of Industrial Waste Utilization and Disposal, Context of the Implementing  Memorandum of Understanding Appendix 4,   Ministry of Environmental Protection, 2009

4. Guides for Emergency Preplan on Post-disaster Solid Waste Management, Ministry of Environmental Protection, 2009

5. Management of Transboundary Movement of Hazardous Waste, Ministry of Environmental Protection of China, 2009

6. Capacity Construction on Control Transboundary Movement of Hazardous Waste  Management and Technical Support for Negotiating, Ministry of Environmental Protection, 2009

7. Technical Support for Negotiating of the Basel Convention, Ministry of Environmental Protection, 2009

8. The 4th International Conference on Waste Management and Technology, Chemical Registration Center of MEP, 2009 

9. Regional Capacity Building Workshop on Best Available Techniques /Best Environmental Practices and Environmental Sound Management of POPs Wastes and PCBs for Asia, Stockholm Convention Secretariat, 2009

10. Asia-Pacific Regional Meeting on SAICM, Consultation and Training to Prepare for Negotiations on A Global Legal Instrument on Mercury and Workshop on Nanotechnology, UNEP, 2009

11. OECD/UNITAR Awareness Raising Workshop on Nanotechnology, UNITAR, 2009

12. Training for Solid Waste Management, Chemical Registration Center of MEP, 2009 

13. Follow-Up Studies on  National Generating Units of Hazardous Waste, Ministry of  Environmental Protection, 2009

14. Environmental Impact Assessment of Hazardous Waste Disposal Center in Maoming, W. Guangdong Area.  Maoming Municipal Environmental Protection Bureau, 2009

15. The Project on Bringing in Technology Abroad and Management Personnel, Ministry of Environmental Protection, 2008, 2009

16. Sino-Dutch Research, Training and Demonstration Centre for Solid Waste Management, The Agency for International Business and Cooperation, Netherlands, 2008-2010

17. Chemical and Physical Properties Analysis on Waste Printed Circuit Board by Thermal Shock Pre-treatment, National Natural Science Fund, 2008-2010

18. Generation, Enrichment, Emission Analysis on Gases Pollutants on Crushing Process for Solid Waste Contained Halogen Flame-retardant, Ministry of Education of China (Specialized Scientific Research Fund for Doctoral Programme, Ministry of Education), 2008-2010 

19. Solid Waste Pollution Assessment and Response Project, the Second Sub-project to the Post-disaster  Environmental Safety Assessment and Response Project of the Massive Earthquake in Wenchuan, 2008-2009  

20. Collection and Treatment Schemes for Electronic Waste, APFED Showcase Programme, 2008-2009

21. The Import/Export Management of E-Waste and used EEE, Secretariat of Basel Convention, 2008-2009

22. Technical Support on Disaster Debris Management, Ministry of Environmental Protection, 2008

23. Guidance on Debris Clearance and Waste Management after Disaster, Ministry of Environmental Protection, 2008

24. The Study on the Recycling of Waste Household Appliances and the Environmental Supervision, Ministry of Science and Technology ( State Environmental Protection Administration of China), 2007-2009

25. Research Project on Supporting Technologies of National Environmental Decision-making, Management  Technical Specification  and  Research on Risk Management  for E-waste Resources, Chinese Research Academy of Environmental Sciences, 2007-2009

26. Implementation Mechanism of Basel Convention and Operation Mechanism Construction of BCRC China, State Environmental Protection Administration of China, 2007-2008

27. Research on Management of Generation Source on Hazardous Waste, State Environmental Protection Administration of China, 2007-2008

28. Research on Management System of Solid Waste, State Environmental Protection Administration of China, 2007-2008

29. Research on Utilization Facility Plan of Hazardous Waste and Special Waste in Beijing, Beijing Environmental Protection Bureau, 2007-2008 

30. Guidance of Solid Waste Managers, State Environmental Protection Administration of China, 2007

31. Studies on Development and Application of Industry-Specific  Technology  Of Municipal Cycle Economy Development in Suzhou,  Demonstration Project on E-waste resource utilization,  the 11th Five-Year Supporting Technology Plan of Ministry of Science and Technology, 2006-2010

32. Demonstrate Project of E-waste and Other Wastes Recycle in Suzhou New and Hi-Tech Industrial Development Zone, Jiangsu Provincial Science and Technology Department, 2006-2009

33. Environmental Management Project on Hazardous Waste and Toxic Chemicals in 2006－Hazardous Waste Legislation: The Hazardous Waste Export Management, State Environmental Protection Administration of China, 2006-2007

34. Environmental Management Project on Hazardous Waste and Toxic Chemicals in 2006－Special Examine on Hazardous Waste (Technology Support), State Environmental Protection Administration of China, 2006-2007

35. Research on the Planning of Comprehensive Treatment of Municipal Solid Waste and Idealization Management Model. National High-tech R&D Program (863 Program) , 2005-2006

36. Research the Liability Insurance System on the Treatment and Disposal of Hazardous Waste, State Environmental Protection Administration of China, 2005-2006

37. A Feasibility Study of Medical Waste Treatment Project in Qinhuangdao, Qinhuadao Qinyun Medical Waste Treatment Ltd, 2005-2006

Academic Achievement

Published Books:

1. Division of Environmental Protection Pollution Prevention and Control of Ministry of Environmental,  Basel Convention Coordinating Centre for Asia and the Pacific(Editor); Fan Yuansheng and Hao Jiming(Editor); Yu Fei, Li Jinhui(Executive Editor, Responsible Person), Zhong Bin. Management of Disaster Ruins-Guidance and Experiment of Disaster Ruins in Countries, Beijing: Chemical Industry Press, 2009.

2. Wang Qi, Li Jinhui, Huang Qifei. Hazardous Wastes and Identification Management. Beijing: China Environmental Science Press, 2008.

3. Zhang Shiqiu, Wang Qi, Cen Chaoping, Hu Min, Li Jinhui, Shao Min. Technical Policy for Environmental Protection and Control Countermeasures for Pollutant, Beijing: China Environmental Science Press, 2008.

4. Li Jinhui, Wang Wei, Wang Hongtao. Planning and Management of Municipal Solid Waste, Beijing: Chinese Environmental Science Press, 2007. 

5. Li Jinhui, Wen Xuefeng. Treatment of Waste Electrical and Electronic Equipments, Beijing: Chinese Environmental Science Press, 2006.

6. Li Jinhui, Yang Lianwei. Treatment of Hazardous Wastes. Beijing: Chinese Environmental Science Press, 2006.

7. Li Jinhui, Wang Qi, Ji Jingping, Ma Junwei, Liu Heping, Zhao Ming. Waste Battery management and reuse. Beijing: Chemical Industry Press, 2005.

Published Articles:

1. Junli Zhang, Jianguo Liu, Cheng Li, Yiying Jin, Yongfeng Nie, Jinhui Li. Comparison of the fixation effects of heavy metals by cement rotary kiln co-processing and cement based solidification/stabilization, Journal of Hazardous Materials, 165 (1-3): 1179-1185 JUN 15 2009. (SCI & EI)

2. Jinhui Li, Song Gao, Huabo Duan, Lili Liu. Recovery of valuable materials from waste liquid crystal display panel, Waste Management, 2009, 29(7):2033  

3. Jinhui Li, Pixing Shi, Zefeng Wang, Yao Chen, Chein-Chi Chang. A combined recovery process of metals in spent lithium-ion batteries, Chemosphere, 2009, 77(8): 14401 

4. Huabo Duan (Graduate), Martin Eugster, Roland Hischier, Martin Streicher-Porte, Jinhui Li. Life cycle assessment study of a Chinese desktop personal computer, 2009, 407(5):1755 

5. Jinhui Li, Huabo Duan. Case study of a Suzhou pilot project on the suitable technology for scrap computer treatment in China. 2009 IEEE International Symposium on Sustainable Systems and Technology (Formerly Electronic and Environment). Tempe, Arizona, USA. May 18-20, 2009 

6. Huabo Duan (Graduate), Jinhui Li. A novel method to reuse non-metallic separated from waste printed circuit board. 2009 IEEE International Symposium on Sustainable Systems and Technology. Tempe, Arizona, USA. May 18-20, 2009 

7. Siting Wang (Graduate), Huabo Duan (Graduate), Weifeng Jia, Jinhui Li. An analysis on recycling of non-metal material from waste printed circuit board, The IASTED International Conference on Environmental Management and Engineering, Banff, Alberta, Canada, July 6-8, 2009 

8. Duan Huabo(Graduate), Huang Qifei, Wang Qi, Zhou Bingyan, Jinhui Li, Hazardous waste generation and management in China: A review, Journal of Hazardous Materials 158 (2008) 221-227  

9. Duan Huabo, Huang Qifei, Wang Qi, Zhou Bingyan, Li Jinhui, Hazardous waste generation and management in China: A review, JOURNAL OF HAZARDOUS MATERIALS 158 (2008) 221-227(SCI& EI) 

10. Guishi Cheng, Qunhui Wang, Xiaohong Sun, Huimin Meng, Jinhui Li, Experimental study on concentration of ammonium lactate solution from kitchen garbage fermentation broth by two-compartment electrodialysis, Separation and Purification Technology 62(2008)205-211    (SCI&EI)

11. Hao Liu, Jinhui Li, Xuefeng Wen, Xiaohua Zhou. Investigation on Collection Mode of Domestic E-Waste in Urban China: The Case of Beijing, Proceedings of the 2007 IEEE International Symposium on Electronics and the Environment, ISEE, 2007, p 257-261 

12. Jinhui Li, Zhongguo Li. The Conception of Suzhou Electronic Waste Resourcesiation Treatment Mode. Resource Recycling, 2007, 9: 32-34.

13. Fenfen Zhu (Graduate), Jinhui Li. The Study of Reamer Wear in Pulverizing Waste Printed Circuit Board of Pulverizing Machine with Air Cooling. Lubrication Engineering. 2007, 32 (2): 32~35.

14. Yin Fengfu, Liu Zhenyu, Liu Zhengang ,  Wen Xuefeng , Jinhui Li.  The Strategy of Haier’ s Environmental Development. IEEE International Symposium on Electronics and the Environment, v 2006, p 364, Proceedings of the 2006 IEEE International Symposium on Electronics and the Environment - Conference Record, 2006

15. Ming Zhao, Jinhui Li, Keli Yu, Fenfen Zhu, Xuefeng Wen. Test Research no Pyrogenation Pollution of Shattering Waste Printed Circuit Boards, Journal of Tsinghua University, 2006. 46(12)  1995-1998

16. Junwei Ma, Zhenzhen Wang, Jinhui Li. Study on recovery of copper from waste printed wiring. Huanjing Kexue/Environmental Science. Volume: 27(9): 1895-1900. 2006 In Chinese

17. Xuefeng Wen, Jinhui Li, Hao Liu, Fengfu Yin, Lixiao Hu, Heping Liu,Zhenyu Liu.  An Agenda to Move Forward E-waste Recycling and Challenges in China. Electronics and the Environment, 2006. Proceedings of the 2006 IEEE International Symposium on. 8-11 May 2006. On page(s): 315- 320  ISSN: 1095-2020 ISBN: 1-4244-0351-0  

18. Fenfen Zhu, Jinhui Li, Xuefeng Wen, Zida Yu. Reamer Wear of Waste Printed Circuit Board Shearing Machine, Journal of Tribology, 2006,vol26(1):84-87